DeviceNet inclinometer

• Vigor Technology DeviceNet
• According to DeviceNet Slave protocol
• Support UCMM explicit message server, client
• Support all kinds of messages, offline connectivity
• Support 5K-1000Kbps total 15 kinds of CiA recommended
• Non-volatile memory storage network parameters, slave station configuration protocol file connectivity
• Built-in high-speed optical isolation
• ODVA certified communication cable

Downloads

Datasheet

Product info

DeviceNet inclinometer is based on Vigor patent tilt measurement technology and combined with DeviceNet interface. It shortens system building and debugging, reducing construction and maintenance costs.
DeviceNet inclinometer meets ODVA standards and implements industry-standard protocols, and has strong measuring ability:

±0.02%FS linearity
±0.005° Offset
Combine with gyro module to realize static/dynamic angle measuring for low/rapid leveling
With vibration module to realize in-time FFT computations; outputs vibration frequency and amplitude directly, eliminating environmental vibration influence
Combine with GPS module to realize data synchronization/acquisition and local position data at different installation places
Performance confirmed for offset, repeatability, hysteresis, and turn-on repeatability
Enhanced algorithms drastically reduce cross-axis error and improve true tilt accuracy
Greatly reduced errors when the real tilt direction is not consistent with the unit’s sensitive axis
Short-circuit, transient voltage, and transposition protections for industrial environments
Users can set all parameters via DeviceNet interface and query factory data

DeviceNet Inclinometer supports the DeviceNet standard protocol, enabling point-to-point or point-to-multipoint communication; suitable for high interference, high real-time requirements, and high-capacity data transmission.
It can directly connect and communicate with various PLCs in real time.

A DeviceNet network can support up to 64 nodes. End-to-end distance depends on network speed: at 125 kbps, max distance up to 500 m; at 500 kbps, max distance up to 100 m.
The bus topology is a trunkline–dropline linear bus. C16 cable option (data and power in one cable) offers an extensive line-up of inclinometers for DeviceNet applications.

Ordering

Example: dual-axis DeviceNet inclinometer, range ±15°, room temperature accuracy ±0.02°, −20~60 ℃ temperature drift ±0.02°, DeviceNet interface output, 15 m cable with plug, vibration function module — model:
SST302-15-G6-F5-00-C13-D3 (15m).

Table 3 — Accessories

Item	Order Code	Accessories Name	Function
Functional model (built-in)	F1	GPS module	Positioning accuracy 2.5 m CEP; 2.0 m @ SBAS Local gravity acceleration automatic revision Time pulse accuracy: 30 ns RMS; raw data 4 Hz Speed accuracy: 0.1 m/s; GPS L1 band, C/A code; Higher-accuracy GPS available
	F4	Gyro module	±100/250/400°/s X/Y/Z dynamic angular rate; In-run bias: ±0.02°/s; Non-linearity: 0.1%FS; Bandwidth: 50 Hz; Noise density: 0.02°/s/√Hz; Higher-accuracy gyro available
	F5	Vibration module	Three-axis detection; frequency response ≤5 kHz; Range: 0g~±1g/±5g/±10g/±20g (adjustable); Real-time sampling: 20.48 kSPS; programmable filter (11 set points); FFT 512-point, real-valued on x/y/z; stores 14 FFT records (x/y/z); Programmable alarm (6 spectrums)
Temperature drift	D1	Temperature drift	Compensation 0~60 ℃, accuracy ±0.01° @ ≤±30°
	D2	Temperature drift	Compensation 0~60 ℃, accuracy ±0.01° @ >±30°
	D3	Temperature drift	Compensation −20~60 ℃, accuracy ±0.02° @ ≤±30°
	D4	Temperature drift	Compensation −20~60 ℃, accuracy ±0.02° @ >±30°
	D5	Temperature drift	Compensation −30~60 ℃, accuracy ±0.03° @ ≤±30°
	D6	Temperature drift	Compensation −30~60 ℃, accuracy ±0.03° @ >±30°
	D7	Temperature drift	Compensation −40~65 ℃, accuracy ±0.05° @ ≤±30°
	D8	Temperature drift	Compensation −40~65 ℃, accuracy ±0.05° @ >±30°
	D9	Temperature drift	Compensation −40~85 ℃, accuracy ±0.05° @ ≤±30°
	D10	Temperature drift	Compensation −40~85 ℃, accuracy ±0.05° @ >±30°

Table 4 — Options

Item	P/N	Option Name	Function
Network access device	SST003-05-14	8-ports industrial switch	8×100 Mb network; VLAN (IEEE 802.1q); Fast redundant ring protection (ITU-T G.8032 V2), failover <5 ms; Supports RSTP/STP; IEEE 802.1x authentication; Broadcast storm suppression; Level 3 industrial EMC; Operating temperature −10~+60 ℃.
Power	SST003-09-04	PoE Power	IEEE 802.3af PI (PSE/PD over network cable); Alternative A (1,2,3,6 signal pairs) and Alternative B (4,5,7,8 spare pairs).