Ranged Inclinometer

• Vigor Technology
• Measuring three-dimensional angle information: roll, pitch and heading
• Maximum measuring range for roll/pitch angle: ±60°
• Heading accuracy ±5°RMS@≤±30°, resolution 0.01°
• Tilt repeatability accuracy±0.0025°
• Refresh rate 5~20Hz
• Customized higher accuracy and dynamic nature products
• Patented tilt measurement technology to realize real high accuracy

Downloads

Datasheet

Product info

Ranged inclinometer is developed to detect target motion objects’ three-dimensional attitude, meanwhile output heading angle (relative to the arctic) and X/Y axis angle data (relative to the
20130509230957548
absolute horizontal plane). Mainly applicable to high precision tilt angle measurement and need heading data in indoor or outdoor industrial field.

Ranged inclinometer is a complement for GPS inclinometer, can realize X, Y, Z three direction attitude measuring without space restrictions, with stable and reliable heading data, calibration function for soft iron and hard iron, eliminate ambient magnetic which influence heading measurement accuracy. It suits for vehicle, onboard, ship and robot application.

  • ±0.02%FS linearity
  • ±0.005° Offset
  • Combine with gyro module, realize static/dynamic angle different measuring for low/rapid leveling
  • Combine with vibration module, realize FFT computations in real-time, output vibration frequency and amplitude data directly, eliminating the influence of environmental vibration
  • Combine with GPS module, realize data synchronization and local position data in different installation places
  • Further confirmed offset, repeatability, hysteresis, turn-on repeatability etc., parameters which are important influence factors to total performance evaluation
  • Internal enhanced advanced intelligent algorithms drastically reduce cross-axis sensitivity, upgrading real tilt angle measuring accuracy and abandoning the traditional incomplete understanding of tilt measurement precision
  • Greatly reduce measuring errors when the real tilt direction is not consistent with the unit’s actual sensitive axis
  • Short-circuit, transient voltage and transposition protection to adapt to industrial environments
  • User can set unit parameters and query factory data

Ordering

20130509231024617

For example, if ordering a Ranged inclinometer with range ±15°, room temperature accuracy ±0.02°, -20~60℃ accuracy ±0.02°, two meters cable with plug, the model should be chosen as:
SST302-15-00-F3-00-C11-D3 (2m).

Meanwhile some options (See Table 4):
PC application software — order number SST003-04-09

Table 3 — Accessories

Item Order Code Accessories Name Function
Output Interface 00 RS232 Direct angle output
Data format: Baud rate 115200 (adjustable), 8 data bits, 1 start bit, 1 stop bit, no parity.
Refresh rate: 5Hz (optional: 10Hz, 20Hz)
G1 RS485 Isolated, compatible with half-duplex or full-duplex communication; ±15kV ESD protection.
Compatible with ANSI/TIA/EIA-485-A-98 & ISO8482:1987(E).
Complies with UL1577 (2500V rms for 1min).
Transmission rate up to 500 kbps, supports max 256 nodes.
High common-mode transient suppression ability >25kV/μs.
Supports Modbus-RTU, sensor supply HEX or ASCII communication.
G2 RS422
Cable / Plug C1 Standard plug with Cable Meets MIL-C-26482, Standard 2m cable, IP67 protection, heavy duty up to 30kg
C6 Standard Plug Meets MIL-C-26482
Temperature Drift D1 Temperature Drift Compensation range 0~60℃, accuracy ±0.01°@≤±30°
D2 Temperature Drift Compensation range 0~60℃, accuracy ±0.01°@>±30°
D3 Temperature Drift Compensation range -20~60℃, accuracy ±0.02°@≤±30°
D4 Temperature Drift Compensation range -20~60℃, accuracy ±0.02°@>±30°
D5 Temperature Drift Compensation range -30~60℃, accuracy ±0.03°@≤±30°
D6 Temperature Drift Compensation range -30~60℃, accuracy ±0.03°@>±30°
D7 Temperature Drift Compensation range -40~65℃, accuracy ±0.05°@≤±30°
D8 Temperature Drift Compensation range -40~65℃, accuracy ±0.05°@>±30°
D9 Temperature Drift Compensation range -40~85℃, accuracy ±0.05°@≤±30°
D10 Temperature Drift Compensation range -40~85℃, accuracy ±0.05°@>±30°

Table 4 — Options

Item P/N Option Name Function
Installation Tools SST003-01-04 Adjustable base with micrometer screw Three-point adjustment, resolution 0.001mm, stainless steel materials
Power SST003-09-02 Portable Battery Packs Output 24VDC, continuous work 24 hours, IP65, rechargeable
Test Report SST003-11-01 Test report for cross-axis sensitivity Test report under banking tilt, average 11 points of full range
SST003-11-02 Absolute Linearity Average 21 points of full range
SST003-11-03 Allowed Installation Misalignment Report Axis migration test report for vertical and axis of inclinometer, 3 angles of point

Copyright 2025 © All rights Reserved. Hemsida Webbdesign Interwebsite Webbyrå

0
    0
    Your quote
    Your quote is emptyReturn